Categories
Contact Us

Shenzhen Huansheng Machinery Co.,Ltd.

 

Tel: +86-755-89265458
Fax: +86-755-89265459
E-mail: carl.liao@mycutcutter.com
Wechat: 15889300925 

Add: 15# Building, 228 Industrial Zone, Henggang Town, Longgang Dist, Shenzhen, China

Service Hotline
+86-755-89265458

News

Home > NewsContent

Woodworking Engraving Machine Ensure The Safe And Reliable Use Of The Circuit

Shenzhen Huansheng Machinery Co.,Ltd | Updated: Nov 03, 2017

Woodworking engraving machine Controller is generally divided into two categories: a class of controllers just to do the drive. Woodworking engraving machine While working, the computer is in a waiting state, and all its computing work is done by the computer. Unable to work in typesetting. Another type of controller using a single board or MCU control, this controller is actually a computer, so as long as the woodworking engraving machine to start work, the computer can immediately do other typesetting work, especially longer time carving, this advantage is particularly obvious.

Good wire rods and guides are the guarantee of the precision and performance of engraving machine in the long run. Wire rods and guides are also important parts of the engraving machine.

This engraving machine is divided into two categories, the other is high-power engraving head engraving machine. A large surface cutting machine: The format is generally more than one meter, but the accuracy of this engraving machine is generally poor; the other is a medium-sized engraving machine: This stone engraving machine is generally used for fine processing and organic label production.

This is a technology that can replace noble solid lasers and aggressive glass marking methods (25wco2 lasers can meet most of the requirements for marking on glass) CO2 lasers are labeled on glass by destroying glass surfaces, A new technology makes it possible to make use of the CO2 laser directly on the glass to make a high quality logo with a sharp outline. Thus, a number of cracks on the glass are permissible, but excessive cracks can cause signs to be unclear, the strength of the data is potentially weaker, and the substrate becomes looser. But there are laser engraving machine Enterprises found that the precise control of the data in the process of crack can prevent these problems.

The greater the strength, engraving strength: Engraving machine engraving intensity refers to the intensity of the laser on the surface of the data. For specific engraving speeds. The greater the depth of cutting or carving. You can use the Engraving machine panel to adjust the strength, you can also use the computer's printing drive order to adjust. Within 10% range, the adjustment range is 1% stronger, which is equal to the speed. The deeper the depth of the cut.

(1) Woodworking engraving machine running time every day under 10 hours, to ensure that the cooling water and the normal work of water pump, can not make water-cooled spindle motor water shortage phenomenon, regular replacement of cooling water, to prevent water temperature too high, circulating water as much as possible to change large capacity water tanks.

(2) Woodworking engraving machine Every time the machine is used, must pay attention to clean up, must be on the platform and the transmission system dust clean, regular (weekly) to drive system (X. Y. z three axes) lubrication refueling.

(3) Woodworking engraving machine If the machine is not long-term, should be regular (weekly) refueling air to ensure the flexibility of the transmission system.

(4) Woodworking engraving machine on a regular basis (according to the use of the situation) to clean the dust in the electrical box, check whether the terminal screws loose to ensure the safe and reliable use of the circuit.

(5) Woodworking engraving machine on a regular basis (depending on the use of) check the machine parts screw loose. Instructions for the use of CNC engraving machines