Categories
Contact Us

Shenzhen Huansheng Machinery Co.,Ltd.

 

Tel: +86-755-89265458
Fax: +86-755-89265459
E-mail: carl.liao@mycutcutter.com

Add: 17# Building, 228 Industrial Zone, Henggang Town, Longgang Dist, Shenzhen, China

Service Hotline
+86-755-89265458

News

Home > NewsContent

How To Install Vinyl Cutter

Shenzhen Huansheng Machinery Co.,Ltd | Updated: Nov 17, 2016

Carving machine installation steps are as follows:

1, Open the box, first clearing plotter fixed tape and the car crash;

2, Using the supplied power cable to connect the plotter and the power outlet;

3, Using the supplied communication cable connect the plotter and computer;

4, Insert a knife block or plotter car holder, tighten the fixing holder or pen holder;

5, Turn on the power;

6, Place media, put down the roller (Note: the roller should be at the media edge,and ensure no deviation from the work area);

7, Set parameter (computer section: a, select model; b, the selected port and set flow mode. Carving machine set a, set the coordinate origin; b, adjust the cutter depth, etc);

8, Cutting plotter from test;

9, Transmitted data over a computer engraving machine, normal output is ready.Now, you can send commands through a computer engraving work.